混流泵

HW型蝸殼式混流泵按國家標準 新系列而設計的節能產品。其性能指標均達到國 先 水平，省材節能效果顯著。

HW Spiral Mixed-flow Pump is an efficient pump designed by latest

national standard.The performance indexes have been upto the international

advanced level and the material and energy saving result is remarkable.

 3、水泵出水量不足

 The waer yield

 of water is not enough

 1、進水管路或葉輪有水草雜物

 2、轉速過低

 3、輸水高度過高

 4、泵蓋及葉輪磨損間隙過大

 5、填料進氣

 6、馬力不足

 7、進水管口插入水中深度不夠

 1. There are waterweeds and sundries in

 inlet pipes or impeller

 2.The rotate speed is too low

 3.Water delivery height is too high

 4.The attrition gap between pump cover

 and impeller is too large

 5.The padding is air in

 6.The horsepower is not engough

 7.The depth of inlet pipe under water is

 not enough

 1、清除水草雜物

 2、調整轉數

 3、降低輸水高度

 4、用紙墊調整間隙至正常

 5、壓緊或更換填料

 6、加大馬力

 7、增加插入水中深度至一米左右

 1.Clear the waterweeds and sundries

 2.Ajust the rotate speed

 3.Reduce the water delivery height

 4.Add paper washers to adjust the gaps

 5.Compact or change padding

 6.Increase the horsepower

 7.Make the depth of inlet pipe under

 water to one meter

 4、耗用功率太大

 The power

 cumption is too large

 1、轉速太高

 2、傳動軸彎曲

 3、填料壓得太緊

 4、軸承磨損或損壞

 5、葉輪和前蓋摩擦

 6、皮帶太緊

 1.The rotate speed is too high

 2.The drive shaft is bend

 3.The padding is too tight

 4.The bearing is worn out

 5.Impeller clashes the front cover

 6.The belt is too tight

 1、降低轉速

 2、校直

 3、擰松壓蓋螺栓或?qū)⑻盍先〕龃虮庖恍?

 4、更換軸承

 5、調整葉輪端面軸向間隙

 6、適應放松

 1.Reduce the rotate speed

 2.Straightening

 3.Loose the cap blot or take our the

 padding and make it more flat

 4.Change the bearing

 5.Ajust the end play of impeller end face

 6.Loose the belt to suitable degree