當管件連接不正后，在安裝整段管路系統時，采用管卡將三通、彎頭等管件硬性扳正，則會使管道系統長時間承受較大的應力，導致一些熔焊不好的位置在一段時間后容易產生泄露。所以在熔焊前，PVC排水管電話，先預安裝，用筆畫標記線；在正式連接時只要對齊該標記線就可以了。

When the pipe fittings are not connected correctly， when installing the whole pipeline system， the pipe fittings such as tee and elbow are rigidly straightened by pipe clamps， which will cause the pipeline system to bear large stress for a long time，奉賢區PVC排水管， which will lead to leakage in some places with poor fusion welding after a period of time. So before welding， pre install and mark line with strokes; Just align the marker line when you are formally connected.

冷熱水管不要同槽

水路改造時，冷熱水管要不要同槽，而且兩者之間距離保持10cm以上。如果熱水管緊挨冷水管，會降低熱水管的保溫性，熱水很快就會變冷。這里還要提醒大家，水管開槽較深，要避免開開橫槽，橫槽會破壞墻體結構。

Hot and cold water pipes should not be in the same tank

In waterway rectruction， whether the cold and hot water pipes should be in the same groove， and the distance between them should be kept at least 10 cm. If the hot water pipe is close to the cold water pipe， the heat preservation of the hot water pipe will be reduced， and the hot water will soon become cold. Here also reminds everybody， the water pipe groove is deep， must avoid to open the transverse groove，PVC排水管生產， the transverse groove will destroy the wall structure.

PVC排水管生產-Gafloon卡弗龍-奉賢區PVC排水管由臺州艾菲力塑膠有限公司提供。PVC排水管生產-Gafloon卡弗龍-奉賢區PVC排水管是臺州艾菲力塑膠有限公司今年新升級推出的，以上圖片僅供參考，請您撥打本頁面或圖片上的聯系電話，索取聯系人：鄭總（Rainy）。同時本公司還是從事PPR管，地暖管，PVC管的廠家，歡迎來電咨詢。