混流泵

水泵的傳動方式

         我廠生產的HW型系列混流泵均可用柴油機、電機帶動，其傳動方式視各地區動力情況而定，訂貨時根據原動機的型號（功率、轉速）確定水泵的傳動方式，以確定皮帶輪的大小或聯軸器的規格。

 IV.    Drive Mode of Pump

       Our HW

seriel mixed-flow pump can be driven by diesel engine and motor.The drive mode

can be chosen according to the local motive power situation. When placing an

order for the pump, we should decide the drive mode of the pump according to

the prime motor type(power, rotate speed) in order to confirm the size of

pulley or coupling.

（二）開車前準備：

1、檢查地腳螺栓的堅固情況。

2、檢查傳動皮帶松緊程度及安裝設備是否安裝妥善。

3、檢查進、出水管是否進氣、漏水。

4、檢查填料松緊是否適宜。

5、檢查電動機和水泵軸心線是否在同一直線上，直聯時，電動機旋轉方向是否符合泵的旋轉方向。

6、檢查泵內有無障礙，軸是否卡住，用手轉動應輕無雜音。

II. Preparation Before Starting

1. Check the foundation bolts if they are firm.

2. Check the degree of tightness of drive belt and check the

installation if it is suitable.

3.Check the water–in and outpipes if they are leaking water and air.

4.Check the degeree of tightness of padding if it is suitable.

    5.Check the

motor and pump axile lead if they are in the same line and check the direction

of rotation of motor if it is the same with the rotation direction of pump.

    6.Check the

pump if there are barriers , if the axile locks, there should be no noises when

turing it by hand.

4、葉輪表面的氣蝕。由于葉片背水面運行時產生負壓，當壓力Pk<Pva時，產生汽穴和蜂窩表面后，在電化學腐蝕作用下，使泵葉汽蝕。

5、容積損失和機械損失。由于泵使用時間長，機械磨損產生漏失和阻力增大，使容積效率和機械效率降低。

以上原因，使水泵性能變差。運行效率降低2～5%，嚴重的可以使水泵效率降低10%以上。