軋機的輥系在換輥前可以預安裝并調整好，軋機停車后只需較短時間即可換上新輥系。而新輥系經少量試軋后即能軋出合格產品。因此這種軋機可調性能好，成材率高。

短應力線軋機可制成二輥式、三輥式或四輥式多種形式的軋機。在型鋼、線材和板帶鋼生產中部有應用。

The roll system of rolling mill can be pre installed and adjusted before changing the roll. After the rolling mill , it only needs a short time to replace the new roll system. The new roll system can be rolled out of the qualified product after a small amount of test rolling. Therefore, this kind of rolling mill has good adjustable performance and high yield.  

The short stress line mill can be made into two - roll, three - roll, or four - roll type rolling mills. It is applied in the middle part of steel, wire and strip steel.

楔橫軋技術是一種低耗的先進生產工藝在連桿生產線上采用楔橫軋制坯熱模鍛壓力機成形工藝生產連桿鍛件具有其它鍛造工藝無法相比的獨特優勢與輥鍛工藝相比材料利用率提高10%以上勞動生產率提高30 50%

Cross wedge rolling technology is an advanced production process with high precision, high efficiency, high efficiency and low cumption. On the connecting rod production line, the forming process of the die forging press of the wedge rolling blank is adopted to produce the connecting rod forgings with the unique advantages of other forging processes. Compared with the roll forging process, the utilization ratio of materials is raised by more than 10% of the labor productivity by 3050%.

軋機專業廠家介紹，在熱軋機運行的過程中，關于其的溫度控制系統主要包括兩個部分，分別為可逆軋機溫度控制系統以及連軋機溫度控制系統。

In the process of rolling mill, the temperature system of the hot rolling mill mainly includes two parts, which are the temperature system of the reversible rolling mill and the temperature system of the continuous rolling mill.