【廣告】
混流泵
(二)開車前準備:
1、檢查地腳螺栓的堅固情況。
2、檢查傳動皮帶松緊程度及安裝設備是否安裝妥善。
3、檢查進、出水管是否進氣、漏水。
4、檢查填料松緊是否適宜。
5、檢查電動機和水泵軸心線是否在同一直線上,直聯時,電動機旋轉方向是否符合泵的旋轉方向。
6、檢查泵內有無障礙,軸是否卡住,用手轉動應輕無雜音。
II. Preparation Before Starting
1. Check the foundation bolts if they are firm.
2. Check the degree of tightness of drive belt and check the
installation if it is suitable.
3.Check the water–in and outpipes if they are leaking water and air.
4.Check the degeree of tightness of padding if it is suitable.
5.Check the
motor and pump axile lead if they are in the same line and check the direction
of rotation of motor if it is the same with the rotation direction of pump.
6.Check the
pump if there are barriers , if the axile locks, there should be no noises when
turing it by hand.
4、注意填料的冷卻情況,填料的的調整,不可太緊,以液體能一滴一滴漏出為準,填料太緊發熱、消耗功率。填料太松、使水泵中的液體漏損過多,降低效率。
Pay more
attention to the cooling condition of padding.The padding can not be too tight,
it is ok that the fluid can leak in drops.The temperature will be high if the
padding is too tight which cumes power.If the padding is too loose, the
fluid leaks too much, the efficiency will be lower.
常用的農用泵
離心泵
離心泵型號、品種規格及其變型產品在農用泵中是多的。根據水流入葉輪的方式、葉輪多少、泵身能否自吸以及配套動力大小和動力品種等,離心泵有單級單吸離心泵、單級雙吸離心泵、多級離心泵、自吸離心泵、電動機泵和柴油機泵等。
2、軸流泵的一般特點
(1)水在軸流泵的流經方向是沿葉輪的軸向吸入、軸向流出,因此稱軸流泵。
(2)揚程低(1~13米)、流量大、效益高,適于平原、湖區、河區排灌。
(3)起動前不需灌 ,操作簡單。
潛水電泵
磁懸浮潛水電泵它實現了世界潛水電泵領域重大突破,有效解決了傳統潛水電泵的種種弊端:如轉換效率偏低、耗電過高、揚程受限、軸承易損、檢修頻繁等。廣泛應用于工礦企業的供排水、農田灌溉及高原、山區供水等領域。
磁懸浮潛水電泵它以獨有的專利技術改變了潛水電泵的制造工藝,轉換效率達到令人的新水平,創造了巨大節能降耗效益。
磁懸浮潛水電泵解決了制約世界潛水電泵領域發展的軸向力問題,潛水電泵的揚程有了突破性提高,填補了超高揚程(單機揚程設計到上千米)和超大流量(高承載)潛水電泵的市場空白;揚程、流量曲線趨于平緩。其轉換效率、單機 揚程均居世界 地位。