上軋輥為液壓式平衡裝置，電動壓下，壓下量480mm，壓下速度60mm／s，正常軋制時下輥固定，上輥壓下。換品種和使用較小直徑的軋輥時，下軋輥用墊片組調節其水平度.

The upper roller is the hydraulic balance device, the electric press down, the press down 480mm, the down speed 60mm / s, the normal rolling roll fixed and the upper roller. When changing varieties and using smaller diameter rolls, the lower roll can be adjusted by the gasket group.

軋制H型鋼時，軋機作為機架使用，帶有兩個水平輥和兩個立輥，對軋件的腹板和翼緣四面碾壓。軋制普通型鋼時，軋機轉換成兩輥機架，即不帶立輥，只帶有兩個水平輥，對軋件進行軋制.

When rolling H steel, the universal mill is used as a universal frame, with two horizontal rolls and two vertical rolls, which are rolled over the web and flange of the rolled piece. When rolling ordinary steel, the universal rolling mill is converted into a two roll frame, that is, without a vertical roll, with only two horizontal rolls, rolling the rolled piece.

輥式軋機生產率可以很高，有的可達到2000-4000 件/小時甚至更高，易于實現自動化生產。總之，輥式軋機適用于對產品精度要求不高，且同時軋制一個或幾個零件的情況。輥式軋機是三種類型中運用多的一種。但其行程大小受到限制，所以，變形程度也受到影響，同時，板式軋機有空行程，故影響到生產率和變形程度都不能很大。圓弧式軋機適用于大批量的為以后鍛造供坯的生產情況。

The productivity of the roller mill can be very high, some can reach 2000-4000 pieces / hour or even higher, and it is easy to realize automatic production. In conclusion, the roll mill is suitable for the low accuracy of products and rolling one or several parts at the same time. Roll mill is the most widely used in three types. The circular arc mill is suitable for large quantities of production for forging later.

五輥軋機，軋機專業廠家介紹，這種軋機也可以進行更為細致的分類，其中一種可以可以用于軋制比較難變形的金屬和合金帶材，另外一種常用于軋制厚度公差很小的不銹鋼、碳鋼和有色金屬帶材。

Five-high mill, mill professional manufacturers, this kind of mill can also be more detailed classification, one can be used for rolling more difficult to deform metal and alloy strips, another is often used for rolling thin tolerance of stainless steel, carbon steel and non-ferrous metal strips.