沖壓件是靠壓力機和模具對板材、帶材、管材和型材等施加外力，使之產(chǎn)生塑性變形或分離，從而獲得所需形狀和尺寸的工件（沖壓件）的成形加工方法。沖壓和鍛造同屬塑性加工（或稱壓力加工），合稱鍛壓。

Stamping is a forming and processing method for workpiece (stamping parts) by applying external force to plate, strip, pipe and profile by press and die to produce plastic deformation or separation. Stamping and forging belong to plastic processing (or pressure machining).

槽鋼的鋸削：槽鋼的鋸削與扁鋼一樣，但是要分二次從寬邊面往下鋸，不能在一個面上往下鋸，應(yīng)盡量做到在長的鋸縫口上起鋸，因此工件必須多次改變夾持的位置。

Channel steel sawing: the channel sawing of the channel steel is the same as that of the flat steel, but it must be sawed down two times from the wide side, and can not be sawed down on one surface, and should be sawed on the long saw mouth as far as  so the  of the clamping must be changed many times.

手鋸鋸削的注意事項

鋸條的松緊要合適，且鋸割時壓力不能太大，以防折斷傷人；

當鋸縫歪斜時，不可急于糾正，而需要慢慢地逐步糾正。

Notice of hand saw cutting

The tightness of the saw blade should be suitable, and the pressure should not be too large during sawing, so as to prevent breaking and hurting people.

When the SAW seam is skewed, it can not be corrected in a hurry, but it needs to be corrected gradually.