由冷床入口輥道及升降擋板、橫移小車、分鋼裝置、步進齒條冷床、編成組的圓鋼，通過橫移小車移送到冷床分鋼裝置，動齒條每步進一個周期，分鋼裝置就撥一根鋼到靜齒條上，使成組的圓鋼逐根分配到每一個齒內，由于上冷床的圓鋼溫度很高。

It cists of cooling bed and lifting baffle, roller, steel traversing trolley device, stepping into the steel group, rack cooling bed, transferred to the steel cooling bed device by traversing trolley, moving rack each into a cycle of steel means a steel dial to static rack, the circular steel group one by one assigned to each tooth, because of high temperature steel cooling bed.

矯直板位于冷床入口側, 由制動裙板拔入的軋制棒材首先落到矯直板上, 使棒材保持大平直度。矯直板每塊長1. 15m, 寬250mm , 上有10個齒形, 塊與塊之間只留出動齒條移動間隙, 安裝在定支架上。

The straightening plate is located on the inlet side of the cooling bed, and the rolled bar pulled by the brake apron first falls on the straightening plate to maintain the maximum flatness of the bar. The straightening plate is 1. 15m long and 10 250mm wide. There is only a movable clearance between the block and block, which is installed on the fixed support.

軋鋼機械輥道部分設計與制作,它是根椐軋鋼設備的規格和軋制的品種而特定的,如機械化程度高的要求不一樣,如大型軋鋼廠須配備翻鋼輥道,自動升降輥道和全自動步進式冷床,軋鋼機一般包括主要設備（主機）和輔助機械（輔機）兩大部分。

The rolling mill roller table is designed and made, which is specific according to the specificati of the rolling equipment and the variety of rolling, such as the requirements of high mechanization, for example, the large rolling mill must be equipped with a rolling mill roller, an automatic lifting roller and a fully automatic step cold bed, and the rolling mill generally includes main equipment (main engine) and auxiliary machinery (auxiliary machine). ) the two part.