鋼的軋制，是整個軋鋼生產過程的核心。坯料通過軋制完成變形過程。軋制工序?qū)Ξa(chǎn)品質量起著決定性作用。軋制產品的質量要求，包括產品的幾何形狀和尺寸內部組織和性能以及產品光潔度三個方面。

The rolling of steel is the core of the whole rolling process. The blanks are rolled to complete the deformation process. The rolling process plays a decisive role in the quality of the product. The quality requirements of rolling products include three aspects, including the internal structure and performance of the geometric and dimensional accuracy of the products and the finish of the products.

采用控制軋制工藝時，為了防止原始奧氏體晶粒過分長大，一般采用較低的加熱溫度和開軋溫度。由于開軋溫度高，變形后的奧氏體晶粒會發生再結晶而細化，如在這個階段停止變第八節控制軋制技術形，軋件即隨溫度下降而產生相變。

In order to prevent the original austenite grain growing too much, the lower heating temperature and rolling temperature are generally adopted in the rolling process. Due to the high rolling temperature, the austenite grain after the deformation will be recrystallized and refined. For example, the eighth section  rolling technology is stopped at this stage, and the phase change is produced as the temperature drops.

冷軋機冷軋速度的快慢與其配置的電機有關。 冷軋機作為一種機器設備本身不可能產生任何動力，其動力主要源自電機，所以電機功率越大，就越能提供較大的軋制動力，軋制速度也能越快；反之電機功率越小.

The speed of cold rolling is related to the motor. As a kind of machine and equipment itself, cold rolling mill can not produce any power, its power is mainly from motor, so the greater the power of the motor, the more rolling power can be provided, the faster the rolling speed can be, the smaller the motor power is.

因?yàn)樗牧械亩虉A柱軸承在外圈上是可以脫落的，所以，也可以將內圈之間安裝于軋輥在輥頸上，并將外圈安裝在軸承座的內部。 我們從軋鋼機整個裝配的過程來看，軋鋼機中軸承以及軸承座在受力的情況上都是比較良好的.

Because the four columns of short cylindrical bearings can be shedding in the outer ring, the inner ring can also be installed between the roller and the roll neck, and the outer ring is installed inside the bearing seat. In terms of the whole assembly process of rolling mills, the bearings and bearing housings in rolling mills are relatively good in force.