軋機的輥系在換輥前可以預安裝并調整好，軋機停車后只需較短時間即可換上新輥系。而新輥系經少量試軋后即能軋出合格產品。因此這種軋機可調性能好，成材率高。

短應力線軋機可制成二輥式、三輥式或四輥式多種形式的軋機。在型鋼、線材和板帶鋼生產中部有應用。

The roll system of rolling mill can be pre installed and adjusted before changing the roll. After the rolling mill , it only needs a short time to replace the new roll system. The new roll system can be rolled out of the qualified product after a small amount of test rolling. Therefore, this kind of rolling mill has good adjustable performance and high yield.  

The short stress line mill can be made into two - roll, three - roll, or four - roll type rolling mills. It is applied in the middle part of steel, wire and strip steel.

軋機專業廠家說，熱軋機的優點主要可以歸納為三個方面。一點，采用熱軋可以明顯的減少能耗，降低成本。此外，熱軋時可以發揮出較高的金屬塑性，而且所產生的變形抗力較小，能夠有效的防止金屬出現嚴重的變形問題。

The mill manufacturer explains that the advantages of the hot rolling mill can be summed up in three aspects. First, the use of hot rolling can significantly reduce energy cumption and reduce costs. In addition, hot rolling can give full play to the high metal plasticity, and the deformation resistance is small, which can effectively prevent the serious deformation of the metal.

六輥軋機，軋機專業廠家介紹，這種軋機的輥系相對來說比較穩定，而且其主要是由一對工作輥和兩對支承輥組成。不過，其在操作上有著諸多不便，因此應用并不廣泛，通常是用于軋制海底電纜的銅帶。

Six-high mill, rolling mill professional manufacturers that the roll system of this mill is relatively stable, and it mainly cists of a pair of work rolls and two pairs of backup rolls. However, it has many inconveniences in operation, so it is not widely used, usually used for rolling high-precision submarine cable copper strip.