加熱爐是將燃料燃燒產生的熱量傳給被加熱介質而使其溫度升高的一種加熱設備。被廣泛應用于油氣集輸系統中，將及其井產物加熱至工藝所要求的溫度，以便進行輸送、沉降、分離、脫水和初加工等工藝。

A heating furnace is a heating device that passes the heat produced by fuel to the heated medium to increase its temperature. It is widely used in oil and gas gathering and transportation system, heating crude oil, natural gas and its well products to the temperature required by the process, so as to carry out transportation, sedimentation, separation, dehydration and primary processing.

在油氣生產中，加熱爐的基本要求如下：

生產。在保證質量的前提下，燃料加熱速度越快越好，這樣可以提高加熱爐的生產效率，減少爐子座數或縮小爐子尺寸?？焖偌訜徇€能降低金屬的燒損和單位燃料消耗，節約維護費用。

In the production of oil and gas, the basic requirements of the heating furnace are as follows:

The production efficiency is high. Under the premise of ensuring the quality, the faster the heating of fuel is, the better it can improve the efficiency of heating furnace, reduce the number of stoves, or reduce the size of the furnace. Rapid heating can also reduce the burning loss of metal and unit fuel cumption, and save maintenance costs.

爐子的燃燒器采用的是自動點火器，并帶火焰檢測。50～60年代，由于軋機能力加大，而推鋼式爐的長度受到推鋼長度的限制不能太長。在正常點火后，如果突然停電，安全裝置電磁閥自動切斷氣路內燃?xì)夤?yīng)。此時必需重新開啟電磁閥開關按鈕，使燃?xì)庵匦滤腿氲綘t子燃燒器內，但是我們在燃燒器上設計配套的電子打火并帶火焰檢測，只要氣體進入到燒咀內電子打火器就會自動打火，點燃?xì)怏w燃燒。

The burner of the furnace is an automatic igniter with flame detection. After normal ignition, if the power fails suddenly, the safety device solenoid valve automatically cuts off the gas supply in the gas path. At this time, the switch button of the solenoid valve must be reopened to re send the gas into the burner burner, but we design a matching electronic fire and fire detection on the burner. As long as the gas enters the burner, the electronic lighter will fire automatically and ignite the gas combustion.

轉底式加熱爐

爐身固定，爐底轉動，放置在爐底上的料坯隨爐底轉動由進料口移送到出料口。根據爐底的形狀，轉底式加熱爐可分為環形爐和盤形爐兩種，冶金廠軋鋼車間多用環形爐。

Bottom reheating furnace

The furnace body is fixed and the bottom of the furnace is rotated, and the billet placed on the bottom of the furnace is transferred to the discharge port from the feed inlet with the rotation of the furnace bottom. According to the shape of the furnace bottom, the rotary hearth furnace can be divided into two types: the annular furnace and the disc type furnace.