冷床主要有拔齒式冷床、齒條步進式冷床、撥爪式冷床、運載鏈?zhǔn)嚼浯?、滾盤式冷床等。

將已軋制成型產品通過輥道輸送進入冷床，再由齒條步進式拔齒等形式，將排列在冷床上的工件逐步移向冷床頂端，達到了工件的冷卻效果。

The main bed tooth pulling type cooling bed, rack step type cooling bed, poking claw type cooling bed, carrier chain cooling bed, rolling disc cooling bed etc..

The rolling molding products through the conveyor into the rack cooling bed, stepping teeth and other forms, will be arranged in workpiece cooling bed is gradually moved to the top of the bed, the cooling effect of the workpiece.

保證合理有序的過鋼節奏，加大矯直測量次數，確保矯直中心在一條直線上。制定矯直輥裝配標準，保證安裝正確，有據可查。建立BH值與矯直輥間距的關系，做到合理配輥，保證輥縫在1－3mm之間。

Ensure a reasonable and orderly flow of steel rhythm, increase the number of straightening measurement, to ensure that the straightening center in a straight line. The assembly standard of straightening roller is set up to ensure that the installation is correct and can be checked up. The relatihip between the BH value and the spacing of the straightening roller is established, and a reasonable roll matching is made to ensure the gap between 1 and 3mm.

潛行裝置有兩種形式：一種是杠桿式，另一種是滑塊式。帶潛行裝置的拉鋼式冷床很大優點足冷床床面利用率可達60%，可以自由地儲存軋件，機動性能較好。

There are two forms of stealth device: one is lever type, the other is slider type. The biggest advantage of the pull steel cooling bed with stealth device is that the utilization rate of the cold bed can reach 60%, so that the rolling parts can be stored freely and the maneuverability is better.

拉鋼式和往復多爪推齒式兩種冷床對于圓鋼都不太適用，容易拉斜、滾亂。冷卻圓鋼（管坯）以使用鏈?zhǔn)嚼浯草^好，上鋼一廠、大連鋼廠的650軋鋼車間都采用鏈?zhǔn)嚼浯?，兩者所不同之處在于：上鋼一廠的圓鋼擱在臺架上，鏈條拉著圓鋼緩慢前進，由于圓鋼單重較大，一般不會亂滾。大連鋼廠的圓鋼直接擱在鏈條上，前進過程中圓鋼與鏈條無相對運動。為適應不同型號、不同厚度的角鋼，防傾翻裝置的上有一個可以隨時取放配重的斗殼，這樣就可以實現不同型號、不同厚度角鋼在裙板處穩定下滑。兩種鏈?zhǔn)嚼浯彩褂脝挝环从扯驾^好。

The two kinds of cooling beds, pulling steel type and reciprocating multi tooth type, are not very suitable for round steel. Cooling round steel (Guan Pi) to use the chain type cold bed is better, the 650 steel mill of Shanghai steel factory and Dalian steel mill use chain cold bed. The difference lies in that the round steel in the first steel plant is on the bench, the chain pulls the round steel slowly forward, because the single weight of the round steel is larger, it will not roll out. The round steel of Dalian steel plant is directly placed on the chain, and there is no relative movement between round steel and chain during the progress. The use unit of the two types of chain cold beds is better.