彎曲度：工字鋼高度小于或等于400MM時，每米彎曲度不得大于1.5MM，總彎曲度不得大于總長度的0.15%。高度大于400MM時，每米彎曲度不得大于1.0MM，總彎曲度不得大于總長度的0.1%。

Bending degree: when the height of the I-steel is less than or equal to 400MM, the bending degree of each meter must not be more than 1.5MM, and the total bending degree should not be more than 0.15% of the total length. When the height is greater than 400MM, the bending degree of each meter must not be more than 1.0MM, and the total bending degree should not be more than 0.1% of the total length.

型材是鐵或鋼以及具有一定強度和韌性的材料通過軋制、擠出、鑄造等工藝制成的具有一定幾何形狀的物體。這類材料具有的外觀尺寸一定，斷面呈一定形狀，具有一定的力學物理性能。型材既能單獨使用也能進一步加工成其他制造品，常用于建筑結構與制造安裝。型材的材質、規格尺寸等可參照相應的國家標準。TheI-steelistherollingsection,andtheinneredgeoftheflangehasthe1:10gradient。軋機結構和軋機布置形式較多。在結構形式上有二輥式軋機、三輥式軋機、孔型軋機、多輥孔型軋機、Y型軋機、45°軋機和懸臂式軋機等。

裝飾材料分為兩大部分：一部分為室外材料，一部分為室內材料。室內材料再分為石材，板材、片材、型材、線材五個類型。

Decorative materials are divided into two parts: one is outdoor materials, the other is indoor materials. Indoor materials are further divided into five types: stone, sheet, sheet, profile and wire.

細木工板（俗稱大芯板、木工板）是具有實木板芯的膠合板，其豎向（以芯板材走向區分）抗彎壓強度差，但橫向抗彎壓強度較高。現在市場上大部分是實心、膠拼、雙面砂光、五層的細木工板，尺寸規格為1220 mm×2440mm。

The woodworking board (commonly known as the big core board and woodworking board) is a plywood with solid wood core. Its vertical (core plate to differentiate) is poor in bending strength, but the transverse bending and bending strength is high. Most of the market is solid, plastic, double-sided sanding, five story blockboard,  1220 mm x 2440mm.