切分刀粘鋼是如何引起的？（1）切分孔型老化，切分孔出來的料在切分契尖處較厚，軋鋼生產線，增加了切分刀的切分負荷；（2）切分道和孔型不對中，使切分刀不能順利切開料型，軋鋼生產線報價，引起粘鋼；（3）切分處冷卻水冷卻效果不好，導致粘鋼；（4）料型控制不好，或有條頭和開花頭現象，使切分刀不能順利切開料型。

How does the slitting tool stick to the steel?

(1) the slitting hole is aging. The cutting hole is thicker at the cut point and the cutting load is thicker. (2) the cutting section and the pass are not in the middle，軋鋼生產線生產商， so that the cutting tool can not cut the material well and cause the sticky steel. (3) the cooling effect of the cooling water is not good， and (4) the of the material type is not good， or there is a strip head and the flower head phenomenon， so that the cutting knife can"t go smoothly. Cut the material type.

棒材精軋件后為什么要采用穿水冷卻工藝？（1）提高了產品的力學性能；（2）減少了產品表面二次氧化損失；（3）穿水后，軋鋼生產線價格，由于軋件溫度低，剛度大，在冷床輸入輥道上事故減少，軋件在冷床上冷卻時塌腰彎曲減少，可以提高成材率和產品質量；（4）冷床長度可相應減少。

Why do we need to wear water cooling technology after finishing bar?

(1) improve the mechanical properties of the product; (2) reduce the two oxidation loss on the surface of the product; (3) after water， because the rolling temperature is low， the stiffness is large， the accident on the roller table of the cold bed is reduced， the bending of the rolled piece in the cold bed is reduced， the yield and quality of the product can be improved; (4) the length of the cold bed can be reduced correspondingly.

鋼的軋制，是整個軋鋼生產過程的核心。坯料通過軋制完成變形過程。軋制工序?qū)Ξa(chǎn)品質量起著決定性作用。軋制產品的質量要求，包括產品的幾何形狀和尺寸內部組織和性能以及產品光潔度三個方面。

The rolling of steel is the core of the whole rolling process. The blanks are rolled to complete the deformation process. The rolling process plays a decisive role in the quality of the product. The quality requirements of rolling products include three aspects， including the internal structure and performance of the geometric and dimensional accuracy of the products and the finish of the products.

軋鋼生產線報價-圣霖國際(在線咨詢)-軋鋼生產線由鞍山市圣霖進出口貿易有限公司提供。軋鋼生產線報價-圣霖國際(在線咨詢)-軋鋼生產線是鞍山市圣霖進出口貿易有限公司（shenglininternational.cn）今年全新升級推出的，以上圖片僅供參考，請您撥打本頁面或圖片上的聯系電話，索取聯系人：王秋。