【廣告】
水泵的傳動方式
我廠生產的HW型系列混流泵均可用柴油機、電機帶動,其傳動方式視各地區動力情況而定,訂貨時根據原動機的型號(功率、轉速)確定水泵的傳動方式,以確定皮帶輪的大小或聯軸器的規格。
IV. Drive Mode of Pump
Our HW
seriel mixed-flow pump can be driven by diesel engine and motor.The drive mode
can be chosen according to the local motive power situation. When placing an
order for the pump, we should decide the drive mode of the pump according to
the prime motor type(power,雨水混流泵, rotate speed) in order to confirm the size of
pulley or coupling.
混流泵是一種“拉出”式結構泵,在檢查和拆卸葉輪和軸封時,毋須將與泵體相連接的管路拆開。裝有精密加工的泵軸,裝有稀油潤滑的軸承,在填料函蓋中裝有防護軸套。軸承箱的油位,雨水混流泵價格,可由恒位油杯來控制。
泵體的支腳,可承受來自管路的任何載荷,并直接傳遞給基礎。這樣,雨水混流泵供應商,轉子不會因?yàn)楸贸惺鼙檬茌d荷而產生彎曲,從而保證軸承的使用壽命。
由于較大的過流面積,從而減少阻塞。
泵的旋轉方向,從驅動端看,為順時針方向。
動力驅動可采用電動機或內燃機。
泵裝置上可以配備完整的放氣裝置,有利于吸入管路的排氣。
開車順序:
1、關閉出口閘閥
2、將水注入水泵,以排除進水管及泵內空氣,可從泵體頂端引水杯注入清水,也可用真空泵注水(開動真空泵,排除水泵及管內氣體在水充滿水泵的同時,起動水泵,雨水混流泵銷售價,打開閘閥,停止真空泵)。
3、開啟電動機(注意水泵的旋轉方向)。
4、當電動機正常運轉后,逐步開大閘閥,達到所要求的工況后,調節填料松緊。若水泵運轉,軸承溫度等都正常,則可繼續運行。
III. Starting
Sequence
1.Close the oulet
sluice valve.
2. Inject
water into pump to remove the air in water-in pipe and pump which can realized
by injecting clear water from the water diversion cup of the pump body end or
by vacuum pump(start the vacuum pump, remove the air from pump and pipes, start
the water pump when the pump is full of water, open the sluice valve, stop the
vacuum pump).
3. Start the
motor(pay more attention on the rotation direction of pump)
4. When the motor runs normally, turn up the
sluice valve gradually, adjust the tightness of padding when gettng to the
required working condition.If the pump runs well, the temperature of bearing is
normal, and it can run sequentially.
企業: 泰安金石泵業有限公司
手機: 13605386905
電話: 0538-6202947
地址: 山東省泰安市泰山區南關路12號