冷軋板帶軋輥的輥身呈微凸，當它受力彎曲時可保證良好扳形；型鋼軋機軋輥的輥身上有軋槽，根據型鋼軋制工藝要求，安排孔型。鋼管軋制中采用斜軋?jiān)碥堉频能堓佊袌A錐形、腰鼓形或盤形。

The roll body of the cold rolled strip roller is slightly convex. When it is bent by force, it can ensure good shape. There are grooves on the roller body of the section mill roll, and the pass is arranged according to the rolling requirements of section steel. The rollers of skew rolling rolling rolling principle of conical drum or disc.

實踐表明，帶雙鍍槽的軸頭在使用過程中，鑲槽壁容易崩裂，目前常用易加工的帶平臺的袖頭代替雙因槽的抽頭。

直徑超過400mm的冷軋軋輥，在鍛造后，多半在中心饅一個670一250mm的通7L。這樣，一力面可以使軋輥經熱處理店的內應力分朽均勾；另一方面在軋輥表面淬火時，可對軋輥通水冷卻，提高淬火效果。

Practice shows that, with double bath head is in use, insert groove wall is easy to crack, at present common processing platform with the cuff instead of double slot for tap.

Cold roll diameter of more than 400mm, after forging, mostly in the 7L center. A 670 250mm. So, on one hand can make the roller stress heat treatment shop allocation hook are; on the other hand, the roll surface quenching, the water cooling roller, improve the quenching effect.

修正精度高，涂層厚度從幾微米到幾毫米，可對金屬工件呈現磨損、劃傷、、裂紋、破損變形、硬度降低、損害等缺點進行堆積、封孔、補對等修正功用，只須打磨、拋光，也可進行車、銑、 刨、磨等各類機械加工，以及電鍍等后期加工。

The thickness of the coating is high, and the thickness of the coating is from several microns to a few millimeters. It can be worn, scratched, pinholes, cracks, breakage and deformation, hardness reduction, damage and other shortcomings to accumulate, seal, and compensate for the defects, such as grinding, polishing, milling, milling, grinding and other kinds of mechanical processing, as well as electroplating later processing.