軋機前后有對中導衛的升降輥道，可保證軋件正確進入軋機。三架軋機的輥系和軸承座同步更換，更換平臺在軋線外側，換輥時間長只用20min。當厚度偏差增大（在板寬方向上厚度不同）導致在材料設計后產品損失中應考慮增加板厚邊緣。傳動側的牌坊，通過液壓方式，由張力螺桿鎖定，操作側的牌坊為“可拉出”式，軋件導衛固定在水平軋機的軸承座上。

A lift roller of the guide in the time before and after the mill, rolling mill can ensure the correct entering. The roll system of three rolling mills is replaced synchronously with the bearing seat, and the replacement platform is on the outside of the rolling line. The longest time for changing the roll is only 20min. The movable side arch is locked by tension screw, and the operation side arch is "pull-out" type, and the rolling guide is fixed on the bearing seat of the horizontal rolling mill.

半閉口式機架是機架與機架蓋之間采用斜楔連接的一種機架。這種機架兼有開口式機架和閉口式機架的優點，裝卸、換輥方便，制造容易，并有較高的剛度，故一般大中型的型鋼軋機都采用這種形式的機架。

A semi closed frame is a frame with a wedge between the frame and the frame cover. The rack has the advantages of open frame and closed frame. It has the advantages of loading and unloading, easy roll changing, easy manufacture and high rigidity. Therefore, a large and medium-sized steel mill is adopted in this form.

軋機專業廠家介紹，其實從實際生產作業來看，關于冷軋機的安全生產主要包括三個方面，分別為：定期檢修、日常安全操作以及日常的培訓管理等。

In fact, from the actual production operation, the safety production of the cold rolling mill mainly includes three aspects, which are the regular maintenance, the daily safety operation and the daily training etc.