減速機的主要特點是具有反向自鎖功能，可以有較大的減速比，輸入軸和輸出軸不在同一軸線上，也不在同一平面上。但是一般體積較大，傳動效率不高，精度不高。

The main feature of the reducer is a reverse self lock function, which can have a larger reduction ratio. The input shaft and output shaft are not on the same axis, nor on the same plane. But the general volume is large, the transmission efficiency is not high and the precision is not high.

在減速機家族中，行星減速機以其體積小，減速范圍廣，精度高等諸多有點，而被應用于伺服、步進、直流等傳動系統中。其作用就是在保證精密傳動下，主要被用來降低轉速增大扭矩和降低負載/電機的轉動慣量比。

In reducer family, planetary reducer is applied to servo, step and DC transmission systems because of its small volume, wide range of deceleration and high accuracy. Its role is to ensure the precision drive, mainly used to reduce the rotational speed to increase the torque and reduce the load / motor inertia ratio.

旋緊緊力螺栓。所有緊力螺栓均需用力矩板手按標明的固定扭力矩?cái)?shù)據進行固定和檢查。減速機與機械設備間的正確安裝類同減速機與驅動電機間的正確安裝。關鍵是要必須保證減速機輸出軸與所驅動部分軸同心度一致。

Tighten tight bolt. All tight bolts must be fixed and checked with the fixed torque data marked by the torque plate hand. The correct installation between the reducer and the mechanical equipment is the same as that between the reducer and the driving motor. The key is to ensure that the output shaft of the reducer is cistent with the of the drive shaft.

減速機的作用

1)降速同時提高輸出扭矩，扭矩輸出比例按步進電機輸出乘減速比，但要注意不能超出減速機額定扭矩。

2)速同時降低了負載的慣量，慣量的減少為減速比的平方。大家可以看一下一般電機都有一個慣量數值。

The function of the reducer

1) reduce the speed and increase the output torque at the same time. The ratio of the torque output to the multiplying and decelerating ratio of the stepper motor output, but we must be careful not to exceed the rated torque of the reducer.

2) speed reduces inertia of load at the same time, and inertia reduces to the square of deceleration ratio. As you can see, general motors have an inertia value.